10 Minute Hooded Towel

 

10 Minute Hooded Towel

 

This tutorial is probably the shortest and easiest one that I will put up... EVER.

 

This whole thing should take you a total of 10 minutes including the time it takes for you to dust off your sewing machine.

 

Hooded towels are so cheap and thin now its a crime. My aunt Chris made me one of these for my daughter when she was a baby and I went crazy from there. I couldn't believe that I had gone even a few months without one!!!!!

 

 

I like to catch the sales at Target when they have them on towels because I find there store brand to be nice and plush (thick). I have made gifted hooded towels from towels and washcloths from Walmart but I didn't like them as much so I only make them from Target towels (on sale) now. I got the towel for $4 and the wash cloth for $2.50 so my whole project cost me $6.50 and will last me years of bath times and pool time (and even play capes).

 

Start with a towel and washcloth. You can match them or have two different colors, the world is your oyster here. You can be super creative or super dull like me and have all matching towels with hoods.

 

Cut off the tags so they don't get scratchy.

 

 

Fold them each in half to find the middle of each the washcloth and towel.

 

 

 

Place a pin to mark the middle of each the wash cloth and towel. 

Open up both wash cloth and towel and line up the pins (center) to make sure the washcloth is centered over the towel. The towel is long-wise.



This project has such limited sewing it is crazy.

 

 

 

Pin the washcloth across the top.

 Fold the washcloth down into approximately thrids and pin on the sides.

 

 

Stitch where you have pinned (red dotted lines only).

 

And there you have it!!!

 

Sorry about the weird white circle!

 

TA DA!!!!!

 

How To: Make a Baby Bib (with free bib pattern)

Whether you are expecting a new baby or you are making a gift for someone who is, you know bibs are essential. I know at a certain point it's like you need 3-10 bibs a day depending how good your kid is at drooling.

This project is nice and quick and doesn't have many steps. The big decision is what fabric(s) to use. I had some PUL fabric or water resistant outer layer. I then picked a light weight fleece for the other side to absorb some moisture. I would recommend picking a fabric that will suck up the moisture or you will be defeating the purpose.

You can choose cute fabric or even use an old t-shirt (using the logo or image). You can add shapes or iron on things to add detail to your project.

Start with the pattern. You can use your own or Download my Bib Pattern

Fold or cut the pattern on one of the "tape lines" and line it up with the other tap line. Your pattern should look like this.

 

Cut along the outer most line. This pattern includes 1/4" seam allowance.

 

 

 

First cut out your pieces from the fabric(s) that you have chosen. You can even make this bib reversible based on this pattern it should be able to be reversed. Lay your pattern pieces both face up. This means the side you want facing out make sure they are both facing up. Next put your Velcro on the top left as indicated by the pattern. I put the fuzzy side on the "outside" or front fabric. then place the hook side in the same spot on the inside fabric.

 

 



 

 

The sandwich to two together. You will know it is right when you have a piece of Velcro on each side. Then sew all the way around with 1/4" seam allowance leaving an opening at the bottom of the bib. Leave yourself 3-4" across the bottom. The easiest way is to start on one end of the bottom and go all the way around ending at the other end of the bottom (see middle picture). Next be sure to clip your project on the rounded curves to ensure professional results. For my quick explanation on clipping click here.

 

 

This is why you should clip your seams.....

 

 

Clipping will help you flip your project right side out and have less issues.

 

You're almost done.

Now flip your project right side out. You should have an opening like the center picture. Fold the opening sides inward and make sure the bottom looks even all the way across. You can pin the section if it makes you feel more comfortable. Then top-stitch all the way around the outside of the project between 1/8" and 1/4". I lined up the bib on my presser foot like this.

 

 

 

 

And there you have it!!!

 

The Importance of Clipping Your Seam Allowance

The Importance of Clipping

Have you ever sewn something only to turn it right-side out and it just doesn’t look right? Chances are your instructions (or lack of instructions if you’re free styling) told you to clip the excess out of the seam allowance.

Clipping is generally used when you have sewn on a curve. The curve could be concave or convex (yes high-school geometry.. remember it?). Basically you will be clipping out small triangles out of the seam allowance to remove the excess fabric that would bunch up if you turn right-side out without clipping. Got it? If not, here’s an example.

This is the seam for an outward curve.

 

Here’s what it will look like if you turn it without clipping.

 

This is how you should clip this type of curve. Clip towards the seam line but be careful not to cut the actual seam. Cutting out triangles will remove the excess fabric for when you turn your project right side out.

 

And your work pays off, here is the finished edge (that has been clipped). See the difference?

 

This is the seam for an inward curve.

 

Here’s what it will look like if you turn it without clipping.

 

This is how you should clip this type of curve.

Start by making angled clips towards the seam line (traveling in one direction) and then come back angling opposite direction. It may not look pretty but it removes the excess fabric for when you flip it.

 

And your work pays off, here is the finished edge (that has been clipped). See the difference?

 

 

No matter what you are sewing you should ALWAYS clip your seams to make your project look more professional.

How To: Make Your Own Bias Tape

How To: Make Your Own Bias Tape

Bias tape is extremely versatile. You can use it to finish off edges to almost anything. Imagine a pot holder, the edging is almost always bias tape. This very useful cut of fabric is also used on things like aprons as well as on clothing items. Bias Tape literally wraps and finishes the raw edge of your sewing project.

The white neck line of this shirt is finished with a bias tape binding.

 

What you will need

Fabric, Scissors, Ruler, fabric pen or pencil, iron

Step by step

To start you will need to decide how long you want your bias tape to be. You can decide this by measuring the edges of where it will be. This distance will then tell you how much fabric you need. Bias tape is cut “on the bias” or at a 45 degree angle.

 

The best way to start is to open up the fabric and find the perfect right angle. You can measure both ways the same distance to make sure you have a square. Then fold the ends together and iron the edge. Be careful not to stretch this edge out of shape. After ironing unfold and cut along this crease.

From this new cut edge use your ruler to measure over the appropriate amount for the correct size binding. Because bias tape is measured by width, the standard 1/2” bias tape is 2” wide when opened up and when sewn and finished covers approx. 1/2” around the edge.

 

After you have cut your width, iron it in half. Then start with one side and fold toward the center (pressed) line. Iron again. Then fold and press the other side towards the center. You can leave it at this stage for sewing or you can fold in half again and press to make sure you have stiff pressed lines. You will use these to sew on. TA DA you have just created bias tape!!!!

 

Next you will need to choose what you are finishing, this is where your project edge will become finished.

Line up one side of your bias tape to the edge of your project. You will place the right side of the bias tape to the wrong (inside) of the project. Then pin and sew along your pressed line (seam allowance) For 1/2" bias tape, your seam allowance will also be 1/2".

 

The amount or width you want as the finished edge should be multiplied by 4 and that total is the amount that you would cut. This accounts for seam allowance.

 

 

After sewing one side to the project it will still look like raw edges and kind of inside out. You will then need to fold over the bias tape towards the right side (outside) of the garment. Then pin and topstitch along the edge of the folded edge of the bias tape. Be careful and take your time this is the outside of your project and it will be seen when you are finished.

 

Now you are done! Congratulations on binding your project with bias tape!!!

 BUT WAIT!!!!! MY PROJECT HAS CURVES!!!!

 

 Never fear! The picture to the left is a mock shirt neck, if you are sewing a shirt please sew it together before binding the edge. This is just to show you how it will look to bind a curve. Start by lining up and pinning the edge of your bias tape with the right side to the wrong side of your project. Sew along your pressed line. If you try to fold over and top stitch at this point (like the straight line tutorial) your project will be bunchy and not look right!!!!

YOU HAVE TO CLIP!!!

Please, please, please, take my advice any time you have corners or curves you need to clip. In this case you will be clipping out triangles. This removes the extra fabric that will bunch together. Clip the triangles with the point towards the seam line. Be extra careful not to cut the seam line or you will have to go back and sew over and reinforce it if you do cut the line.

 

Once you have clipped the excess out now you are ready to fold the rest of the bias tape over to the right side of the fabric and top stitch.

 

Once again, take your time with your topstitching. People will see your squiggly lines because this is the outside of your project!!! PRESS your project for a nice finished look!

 

 

 

And there you have it!

Congratulations on completing you bias binding project! Have any suggestions for a tutorial you would like to see? Please email us!